Hoggi SWINGBO, User Manual

Page: 10 / 28

8
If your SWINGBO wheelchair is equipped with push handles, push
bar or with a single push handle, please proceed as follows:
• Open the cam lever (11) on both sides (for a single push handle
one side only).
• Place the push handle unit or the push bar down into their locating
brackets (12).
• Press in the spring button and slide the push bar (13) downwards
fully into its bracket, until it clicks into position.
• Close the cam lever on both sides (for a single push handle on one
side only).
• When the cam lever is open, its tension can be altered by adjusting
the knurled nut (15).
CAUTION!
The maximum adjustment of the push handles/ push bar
is pre-determined. On no account must they be adjusted
beyond these limits.
Press on the push handles/push bar to ensure that they
are securely located.
11
12
13
14
15