Hoggi SWINGBO, User Manual

Page: 13 / 28

11
The seat height (26) is dependent on the chosen rear wheels and
front castors, as well as on the height of the rear axle and the positi-
on of the front castors in the front castor forks.
The SWINGBO wheelchair will be built in accordance with the
customer’s order. It is possible for the dealer to modify the seat
height.
The wheelbase (27) can be adjusted in four steps. This will change
the distance between the rear axle and the front castor axle.
The SWINGBO wheelchair will be built in accordance with the
customer’s order. It is possible for the dealer to alter the wheelbase.
The SWINGBO wheelchair can be supplied with rear wheels
inclined (camber) 6° (28 left) or 9° (28 right) from the vertical.
The SWINGBO wheelchair will be built in accordance with the
customer’s order. It is possible for the dealer to modify the camber of
the rear wheels.
4.3 Seat depth
To adjust the seat depth first remove the seat cushion. Loosen the
four screws under the seat and adjust the seat depth by sliding the
seat to the required position.
Whenever you change any settings on the wheelchair,
make sure that you firmly tighten any screws that have
been loosened.
4.4 Backrest height
The upholstered back cushion and hip pads must first be removed.
Loosen the four screws in the metal backrest and move the backrest
to the required height. This is applicable to both the high and the low
backrest.
Whenever you change any settings on the wheelchair,
make sure that you firmly tighten any screws that have
been loosened.
26
27
28
29
30