17
Conversion rear axle frame
If a change from <= 5cm to >= 5cm is made when setting the active de
-
gree to >= 5cm, the rear axle mount must be converted and aligned with
the long end to the front.
The first step is to remove the two screws to the bearing plate on both
sides, so that the complete back base can be removed.
The screw connections from the rear axle mount to the upper frame must
now be loosened and removed on both sides.
Loosen the screw connections from the axle mount to the rear axle
frame.
A rear axle frame can now be pulled out of the clamp
Replace the axle frame in the new orientation and rotate the axle by
180°.
Summary of Contents for SUPRA 2.0
Page 1: ...en SUPRA 2 0 Service instructions Partnerschaft f r mobile Kinder...
Page 38: ...38...
Page 39: ...39...
Page 40: ...40...
