Low Batteries
When battery power is getting low, the LCD displays will blink indicating low battery power. Blinking
LCD displays indicate that the microFET3's battery power may be low. If LCD displays keeps blinking after
pressing Reset, the battery should be recharged.
To avoid testing interruptions due to low battery power, we recommend that you check remaining batter
power regularly, and recharge battery when it reach approximately 15% power level. To check battery power,
follow the battery check instructions on page
9.
Changing Batteries
MICROFET3 uses (1) 3.7V LI-ION high quality battery. To change the battery, turn the unit over and remove
the attachment. Unscrew the 4 Phillips head screws, remove bottom of the unit, replace the battery and re-
tighten the screws. If the segment does not light up after installing a new battery, contact Hoggan Customer
Service Department at 800-678-7888.
Warranty
Product Warranty Information
The microFET3 is warranted for a period of one year from the time of purchase. If the microFET3 fails to
operate because of defect in materials or workmanship at any time within one year of the purchase date, it will
be repaired or replaced free of charge by Hoggan Scientific LLC. Extended warranties (additional year or
years) are available at an additional nominal fee.
If you wish to purchase and extended warranty after the purchase of your microFET3, there is a 30 grace period
to purchase an extended warranty package. Contact Hoggan Scientific for more information.
Warranty Registration
To ensure that your warranty is in force, please complete and mail, or fax your warranty card to Hoggan
Scientific LLC at 800-915-3439. Or visit
www.hogganhealth.net
to register your warranty information online.
Please save proof of your original purchase date, such as your sales slip, invoice, credit card voucher, or
cancelled check to establish the warranty period.
Warranty Repairs
Before deciding that your microFET3 is inoperable or defective, please review and follow the information in
the instruction booklet.
In the unlikely event that your microFET3 becomes inoperable, please contact Hoggan Scientific to arrange to
have the equipment repaired or replaced. Hoggan reserves the right to repair or replace the unit with new or
refurbished parts or equipment.
Hoggan Scientifics’ Customer Service Department can be contacted at 800-678-7888, or by email at
.
When Hoggan Scientific Customer Service Representative authorizes return of the product, you will be
given Return Merchandise Authorization (RMA) number. Please include the RMA number with your unit.
Warranty Exclusions and Limitations
The microFET3 warranty does not cover damage by negligence, misuse, or accident. Damage or unit
failure caused by modifications or repair other than by Hoggan Scientific or its authorized repair agent, or
damage to equipment resulting from improper installation or operation is not covered. Any warning or
instructional labels or decals must remain on the unit for the warranty to be valid.
Page 18
Summary of Contents for microFET3
Page 1: ...microFET3 User Guide...
