Force Measurement Settings
To select unit of measure to display force in Pounds, Newtons, or KGF follow these steps:
1. Press and hold the MT/threshold button for five seconds. The display will show units of measure options.
“L” = Lbs., “g” = KGF, “n” = Newtons.
2. Press the MT/THRES button to toggle through options. Refer to Image F below where “L” (Lbs.) is selected
IMAGE F
3. Press the Reset button to return to test mode.
Wireless Mode - Power On/Off
To turn on RF or wireless mode for microFET3 for use with software follow these steps:
1. Hold the MT/THRES button down for 5 seconds for the force measurement setting mode.
2. Continue to hold the MT/THRES button down for another 5 seconds to turn on the wireless power.
3. The Peak Force display will show RF (wireless) (left LCD window), and the Duration/Secs (right LCD
window) display will show On or Off.
4. Press the MT/THRES to toggle the RF (wireless) power on or off. Toggle On for RF wireless mode to use
unit with software. Refer to Image G below.
IMAGE G
Page 9
Summary of Contents for microFET3
Page 1: ...microFET3 User Guide...
