HOW TO USE THIS PRODUCT
MAINTENANCE AND ATTENTION
1.
This product has a ON/OFF switch. Press the switch one, the light will turn ON (this product has a light sensor, it can only be turned on in a
dark environment). Press the switch again and the light will turn OFF.
2.
How to replace the included battery: The battery will degrade over time, to maintain the best performance, please replace the battery after
about 2 years. Remove the 4 screws on the bottom cover, exchange the LiFePO4 3.2V 1500mAh battery.
1.
Before using the solar light for the first time, leave the light in direct sunlight for about 6-8 hours. The light will achieve optimum light output
after the enormous exposure to the sunlight.
2.
Please keep the surface of the solar panel clean, to make sure the product works at its best performance.
3.
It’s important to install the light in a location that receives full sunlight each day, away from the shade caused by trees, buildings etc. Shady
locations will not allow the battery to fully charge and will reduce the hours of night time light.
4.
This solar light includes a built-in photo sensor, which detects the level of surrounding natural light and controls when the light will
automatically switch on and off. The solar lights should be placed at least 1 meter apart from one another and away from other night time
light sources as this might keep the solar light from automatically turning on at dusk.
5.
The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy
days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operaring time.
1.
2.
