SPECIFICATIONS
The remote control Wireless IR Configuration Tool is a handheld tool for remote configuration of IR-enabled fixture integrated sensors. The tool
enables device to modify via pushbutton without ladders or tools, and stores up to four sensor parameter modes to speed configuration of multiple
sensors.
The remote control send sensor setting at mounting height up to 50 feet. The device can display previously established sensor parameters, copy
parameters and send new parameters or store parameter profiles. For projects where identical settings may be desired across a large number
of areas or spaces, this capability provides a streamlined method of configuration. Settings can be copied throughout a site, or in different sites.
POWER SUPPLY
2x AAA batteries, alkaline preferred (not included)
CARRYING CASE
Carrying case included
RANGE
Up to 15m (50ft)
OPERATING TEMPERATURE
0°C-50°C (32°F-122°F)
DIMENSIONS
123x70x20.3 mm (4.84”x2.76”x0.8”)
WARNING!
Remove the batteries from the remote if the remote will not be used for extended periods (30 days).
OVERVIEW
LED INDICATORS
LED
DESCRIPTION
LED
DESCRIPTION
BRIGHTNESS
High end trim turning function (to
set the output level of connected
lighting during operation
To select the current surrounding
lux value as the daylight threshold.
This feature enables the fixture
to function well in any real
application circumstances
SENSITIVITY
To set the occupancy sensing
sensitivity of the sensor
The daylight sensor stops working
and all motion detected could turn
on the lighting fixture, no matter
how bright the natural light is
HOLD TIME
The time that the sensor will turn
off (if you choose stand by level
is 0) or dim the light to a low level
after the area is vacated
STAND-BY DIM
To set the output level of
connected lighting during vacancy.
The sensor will regulate the
lighting output at the set level.
Setting the stand by dim level at 0
means light full off during vacancy
DAYLIGHT SENSOR
To represent various thresholds of
natural light level for the sensor
STAND-BY TIME
To represents the time that the
sensor will keep the light at low
dim level after the hold time
elapsed
