0055
- 19
5.5.2 - "SPLIT" MANAGEMENT
SPLIT is only possible in the case of outer sidewall static or ALU-M unbalance. Its purpose is to hide any
unbalance correction adhesive weights behind the spokes of the rim.
SETTING THE NUMBER OF RIM SPOKES
- Press
on the STATIC or ALU-M measurement panel;
- - A window will appear on the screen indicating the number of spokes currently set
- Set the number of desired spokes in a range between 3-12 by means of button
and
- press
to confirm the setting
- Move a spoke upwards along the vertical
- press
;the measurement panel will reappear on the screen with the unbalance figures already split up.
The inner sidewall ALU-M unbalance does not vary, while for the outer sidewall STATIC and ALU-M unbalance,
two weights appear for the same sidewall:
- slowly turn the wheel until an unbalance figure appears;
- fit an adhesive weight of the displayed value, for the outer sidewall or STATIC, behind the spoke uppermost
along the vertical;
- again turn the wheel until a new unbalance value appears;
- fit an adhesive weight of the displayed value, for the outer sidewall or STATIC, behind the spoke uppermost
along the vertical;
- make a spin to check correct wheel balance.
Note:
if SPLIT is engaged, the icon
will appear in the lower part of the screen.
input
Summary of Contents for Megaspin 800
Page 3: ...0055 3 ...
