Configurations for the DPH-64.
Press ‘MODE’ to go to the first configuration window. The selections
here are to calibrate an electrode or mA current output and set time. To
scroll the selections rotate the ‘VALUE’ knob. Pressing again selects this
option and enters the appropriate window. Press MODE to move to the
MANUAL window to switch relays on and off manually.
Calibrating pH or mV
The “calibrate to” field when entering a calibration automatically jumps
to the nearest whole pH or 100mV of the measured electrode input. This
minimises excessive scrolling to obtain a number. To change to a specific
pH or mV dial the desired value and save.
.1/ " Functionsaccessible from the main window.
.1/ # Calibration menu for pH.
DPH-64 Instruction manual
PAGE 11
