7
Respiration Therapy Device
TREND 300
Safety Instructions
In order to maintain electric safety please observe the
following points:
■
Do not switch on the device if casing or cable
are damaged.
■
Do not open the casing of
TREND 300
. In case of
failures always contact your authorized dealer.
■
The device is always to be kept dry.
■
Never use the device in damp rooms
or in a bathroom.
■
Never place vessels or glasses
filled with liquids on the device.
■
In case the device falls into water, do not touch it.
■
Do not place the device in the near of
water-containing vessels (or a bath-tub).
■
Before cleaning the device the AC power plug
is always to be pulled out of the socket.
Stand-by-Operation
When the turbine is switched off the unit is in stand-by
mode and this is indicated by the illuminated display
with date and time.
When an air humidifier is connected to the unit, this is
in standby mode; the present heater setting is indica-
ted.
The power consumption in this operating mode is
approx. 3,5 Watts.
By switching off the device with the main switch on the
reverse of the device
TREND 300
is totally switched
off.
In this case the internal clock is supplied by
a built-in battery.
■
TREND 300
can safely remain
in standby operation all the time.
NOTE:
The memory of the digital trigger may be inaccurate if
the mask is put on and taken off repeatedly while the
fan is running. If the digital trigger does not change the
pressure correctly there after, it is recommended to set
back the trigger computer memory. Turning the ventila-
tor off and on once is sufficient.
