hofflights.com
18
INSTALLATION MANUAL
ZANZIBAR
IMH-099 v.01
MAKE THE ELECTRIC CONNECTIONS
INSTALLING THE FAN TO MOUNTING BRACKET ON CEILING
USING YOUR CEILING FAN
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
1. Insert the receiver into the mounting bracket with the flat
side of the receiver facing the ceiling. Motor to Receiver
Electrical Connections: Connect the Pink/red/brown
wire male plug from the fan to the corresponding female
terminal on the receiver. Make sure all connections are
secured
2. Receiver to House supply wires Electrical Connections:
Connect the Brown(hot) wire from the ceiling to the
Brown wire from the receiver. Connect the Blue(neutral)
wire from the ceiling to the Blue wire from the Receiver.
Secure the wire connections with the wire nuts provided.
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
1. Install ball end of downrod into mounting bracket
opening. Align (engage) slot on ball with tab on mounting
bracket. Warning: Failure to align slot on ball with tab
may result in serious injury.
2. Slide the canopy up to ceiling andalign the keyhole slots
on the canopy with the preassembled screws on the
hanger bracket. Twist clockwise until it locks. Tighten
the two screws securely.
REMOTE CONTROL
Turn on the power and check the operation of the fan
1
ON/OFF the fan
2
ON/OFF the light
3
Speed of the fan (1 low speed - 5 high speed)
4
Direction of the fan (summer/winter mode)
5
Timing control of the fan
Supply circuit
Receiver
Blue (Neutral)
Blue (N)
Brown
(phase)
Pink/red/brown
plug (male)
Brown (L)
Yellow/green
(ground)
Yellow/green
(ground)
1
2
4
5
3
FAN
3
F/R
4
2
1
1H 4H 8H
5
LIGHT
ON/OFF
ON/OFF
