HOFFEN POJM170352, Instruction Manual

Page: 21 / 26

3
21
7.3 DRY IRONING
1. Place the iron upright.
2. Set the steam adjustment knob to “
0 ” (no steam).
3. Plug the cord into an earthed power supply socket.
4. Set the required ironing temperature opposite the temperature-ready light
located on the housing of the iron by turning the temperature control clockwise
to the desired position.
5. Water may remain in the water reservoir during dry ironing.
CAUTION! Check the laundry care label for the required ironing temperature.
Material Temperature Recommendation
MIN (Synthetics e.g. acrylic,
nylon, polyamide,
polyester)
Low temperature Always check if
the temperature
is right by ironing
a part of the
article that is
not visible when
worn or used.
°
Silk Normal
temperature
°°
Wool Normal
temperature
°°°
Demin Lin/Cotton Normal or high
temperature
MAX High temperature
If you do not know what kind or kinds of fabric an article is made of, determine
the right ironing temperature by ironing a part that is not visible when the
article is worn or used.
ATTENTION! Always start ironing with the articles that require the lowest
ironing temperature.
6.The indicator light will turn on.
ATTENTION! The temperature control must be turned at least to the middle
position between the MIN and SILK SYNTH VELVET , for the light indicator
to go on and the iron to start heating.
7. When this light goes out, it means that the iron has reached the desired
temperature