3
29
Remove the cutting head and the face brush in the same way. Remove the head
protective cap (if it is installed).
1. To install the face brush/head, grab the device body, put the face brush/head on
the drive unit, and press down. A characteristic click will be heard.
Caution!
Do not twist the face brush/head.
2. To remove the face brush/head, grab the head/face brush and pull it.
3. It is recommended to put the protective caps on the heads/face brush (if such
caps are available for them), when the device is turned off and not in use.
Prior to use, remove the protective cap.
Warning!
Switch off the device, unplug it and let it cool down before
cleaning and maintenance to avoid electric shock and burns.
8.1 GENERAL RULES
Clean the device regularly to ensure its correct, longer, and more effective operation.
It is recommended to clean the face brush and the heads after each use.
Caution! Do not clean any device part during charging.
Correct and regular cleaning will improve the safety of the product and extend its
lifetime.
Caution!
Never clean the device with harsh, alkaline, abrasive or disinfecting chemical
compounds, as they may damage the device’s surfaces.
8.2 CLEANING THE HEADS (TRIMMER, FACE SHAVER, HAIR
CLIPPER) USING WATER OR THE CLEANING BRUSH
Warning!
Prior to cleaning in water, disconnect the device from the power
source.
• Remove the head. See point
7.4 Head installation/removal.
• For the heads: the nose hair trimmer, the hair clipper — rinse them under running
water or clean them with the cleaning brush.
• The face shaver head must be opened. Press the shaver head opening button
8. CLEANING AND CARE
