3
28
Caution!
Using the trimmer, you may smooth and fine cut the hair in the
areas of the neck, sideburns, and around the ears.
6. Using the trimmer and trimming require practice. Therefore, we recommend
that you observe caution during the first trimming.
7. Clean the trimmer in accordance with the tips in chapter
8. Cleaning and care.
8. Close trimmer.
FACE BRUSH
Caution!
Use the face brush for washing your face.
1. Install the face brush, if it is not installed.
2. Remove the face brush protective cap.
3. Wet your face, apply face washing liquid directly on the face
or on the face brush, and position the face brush at the face.
4. Turn on the device.
5. Wash the whole face. Avoid the areas around the eyes, nose,
and ears.
6.
When finished, wash the liquid off the face and dry with a
towel.
7. Clean the face brush in accordance with the tips in chapter
8. Cleaning and care.
8. Then put the protective cap on the face brush and store it in a safe place.
CAUTION!
The face brush must be dry before putting the protective cap on it.
NOSE HAIR TRIMMER
1. Install the nose hair trimmer head, if it is not installed.
2. Remove the nose hair trimmer protective cap.
3. Make sure the nose is clean.
4. Put the trimmer head into one of the nostrils and turn on.
5. Repeat with the other nostril.
6. Switch off the device.
7. Clean the nose hair trimmer in accordance with the tips
in chapter
8. Cleaning and care.
8. Put the protective cap on the nose hair trimmer and store it
in a safe place.
Note!
The nose hair trimmer may also be used to remove
hair in the ears.
9. Perform the same steps as for application in the nose. The ears must be clean.
7.4 HEAD INSTALLATION/REMOVAL
CAUTION!
To install the face brush/head, make sure the tab in the face brush/
head aligns with the notch in the drive unit.
