HOFFEN 183/20, Instruction Manual

Page: 28 / 36

1. If you need the device to produce stronger cooling power, you can:
a) Place previously cooled charges (2) inside the top chamber (see fig. 3). Before use,
fill the charges with water and cool them down in a freezer. Remember to always
place the cooling charges inside the top chamber. Never place them inside the bottom
water tank!
a) Fill each charge with water to approx. ¾ of its capacity. Water volume tends to
increase during freezing.
Fig. 3. Properly inserted cooling charges in the top chamber.
Warning !
• Keep the cooling charges away from children to avoid drinking from them. Do not
exceed the maximum permitted volume when filling it with water.
• Do not use the COOL (cooling) function when there is no water inside the water tank
to prevent damage to components. Before turning on the device in cooling mode,
make sure that the outlet valve of the tank is properly secured.
• Fill the cooling charges and water tank with clean water only
Replacing remote control battery:
If the remote control starts to malfunction or operate in an unsatisfactory manner,
please change the battery with a new 3 V CR2025 battery.
1. Open the battery tray.
2. Place the battery on the tray with the „+” downwards.
3. Close the tray.
6. BEFORE FIRST USE
Before first use of the product, make sure that all of the elements listed in the manual
are inside the packaging. Remove all packaging elements before use. Keep the
packaging for future reference as it contains important information. If any components
are missing, please promptly contact the sales point.
28