22
GB
Manual disinfection process
■
If you add the disinfection agent, the water system (side jets/pumps) / air system (bottom jets/blower) or mixed
system has to be started to spread the added disinfection agent and after 1 minute it should be switched off
again manually.
■
After 30 minutes of disinfection process, the system should be start again for 2 minutes (manual start/stop)
■
After disinfection the bathtub should be emptied.
15
Usage and maintenance
Usage
In general, bathing in the water massage bathtub is a relax or great fun. However, for a small group of people it may
cause a threat to their health.
In case of doubts consult a doctor.
In case of the following group of people/users we advise against using the water massage bathtub:
■
Babies up to 1 year old
■
People with unstable blood circulation
■
After consuming a big amount of alcohol
■
People with a cold or
fl
u
■
In case of problems with the heart/blood circulation
■
After a visit in sauna use the bubble bath after a longer break during which you cool down
■
Immediately after eating
■
When the whirl tub is used by children, they should be under constant supervision of adults.
■
When older or disabled people with limited physical abilities use the whirl tub, special caution should
be exercised.
■
Specialized companies and the
fi
rst user declare that they will make the operating manual available
for subsequent owners and users.
The temperature of water in the whirl tub should not exceed the average body temperature. The ideal scope
of temperatures is from + 32°C to + 37°C.
For your own safety please make sure that no electric devices or other current conducting elements will not fall into
the bathtub
fi
lled with water.
Maintenance
Additives for bathing containing solids, such as turf, oils, etc., cannot be used.
We recommend to use Hoesch foam baths for whirl tubs.
After a bath rinse the bathtub surface with water and wipe it with a wet cloth.
Do not use scrubbing agents!
When
occasionally cleaning the bathtub thoroughly, spread a couple drops of the cleaning agent on the surface and wipe it with
a soft cloth. Remove heavier dirt using warm water and a mild liquid cleaning agent, or soap water.
Calci
fi
cations should be removed with the use of lime removing vinegar and water
(do not these use for fittings!)
.
In case of using the agents for cleaning drains please observe the usage instructions!
Small scratchings or fragments of the shiny surface that have lost their smoothness should be removed with the use
of e.g. the HOESCH maintenance set, article No.: 6991 00.
Tip:
Fittings and built-in elements should be cleaned with a soft cloth. Damages caused as a result of improper usage
of chemicals, acids and scrubbing agents will not be taken into consideration by us as the reason of a complaint.
Summary of Contents for Laola II
Page 91: ...91 ...
