background image

DVD DUPLICATOR 

 

Notice for DVD 

The followings are notices for operations of DVD with the DSR. 

Format 

  Supported DVD formats by DSR are as follows: 
 

 COPY 

VERIFY 

DVD-ROM 

 

 

DVD-R

 

(*1) 

 

 

DVD-VIDEO 

 

 

    *1 Format not supported by DSR on DVD-R cannot be used. 

 Media 

  DVD-RW drive in DSR is For General. Use the standard DVD-R/RW media. 

DVD-R/RW media used for DSR must be same. If you use a different type of media, it may be a cause of error during operation. 

  Operation from DVD to CD or from CD to DVD is not supported.  
  For 4X/2X recording, use a compatible DVD-R disc.  
  For 2X recording, use a compatible DVD-RW disc. 
 

Mode and master drive for DVD 

 

  There are three modes for DVD. 
  * COPY--------------------------------------- 

Copy the data from master drive to blank disc. 

  * VERIFY------------------------------------ 

Verify (compare) the data between master drive and target disc (s). 

  * COPY + V (copy + verify)--------------- 

Copy and Verify in a row. 

 
  There are two kinds of master drive. 
  * DVD ----------------------------- 

 Disc inserted into the DVD-ROM drive is recognized as the master disc and read from this disc for 
every process. 

  * HD ------------------------------ 

 Internal HDD is the master drive. It is required to register the master data from disc in the 
DVD-ROM drive first. After the registry in HDD, the master disc is no longer necessary. 

 
  Mode & master is saved as the last process you executed. LCD displays the mode & master in the DVD main screen. 
 

COPY START? 

(MEDIUM)

 

COPY START? 

(DVDtoDVD) 

 
 
 
     Mode  Write speed       Master drive 
 
  In this chapter, it is assumed to set COPY mode and explained the following items. 
  * Copy from disc to disc (DVDtoDVD) 
  * Register the master disc (DVDtoHD) 
  * Copy from HDD to disc (HDtoDVD) 

 30

Summary of Contents for DSR-4000dp































































Reviews: