www.hobiecat.com
E U R O P E
Ref : MM_TEDDY
Issued by : IR
Date : 01/2015
Up-date : 2
Page : 27/32
HOBIE TEDDY
ASSEMBLY MANUAL
Cunningham & Bout de redressement
Illustration
Steps Description
1
Cunningham
• Locate the cunningham line and the cunnin-
gham double block with hook
• Attach the hook to the tack of the mainsail.
• Fasten one end of the cunningham line to the
cleat mounted at the bottom of the sail track
on the mast.
• Pass the other end through one of the sheaves
on the block and then back down around the
cleat.
• Thread the line through the remaining sheave
and then pull down on the line to remove the
wrinkles from the front of the mainsail. Tie the
line off on the cleat.
• The stronger the wind, the more cunningham
tension is required.
2
Righting Line
• Tie a knot about 35 cm from the end of the
line and pass the short end down through the
grommet at the centre front of the trampoline.
• Then pass the line through the eyestrap
mounted underneath the mast step and tie a
figure 8 knot at the end.
• A knot in the righting line just above the grom-
met will prevent the righting line from slipping
down and dragging in the water.
3
• Now, stow the rest of the righting line in the-
trampoline pocket.
