16
ａ
ａ
3.5(
guide
)
A A
B part
diagonal
dimension
Gutter
Middle frame
Roof panel
①
②
Roof rafter
Side frame
U-shape gutter
Panel
Roof rafter
※
Check post interval, flat and the diagonal dimension of the roof is
equal.
※
In case diagonal dimension of the roof is not equal, loosen
the screws of the middle frame, gutter, main frame and beam
and adjust them.
■
A-A’ section drawing
■
B part detailed drawing
※
When installing roof panels, please be noted below.
10
Installation of roof panels
Before installing the roof panels
Insert the roof panel into the middle
frame and then set on the gutter side.
※
Adjust the roof panel end to the
U-shape gutter.
※
Sort the panel equally right and left. Otherwise
the expansion of panels resulting from
temperature changes causes the noise.
In case of polycarbonate (SI) and FRP panel,
attach the unevenness side down. In case of
polycarbonate (AO/BR) and heat protection
polycarbonate, there are no two sides because
of both sides weatherproof.
Notice
