10
For D36 to D60 this bolt
doesn’t need.
Connect between post and
beam with corner bracket and
fix it with hexagon bolts M8x25.
For D36 to D60(Wide beam)
Insert the post into the base
hole, and fix with support
stand not to fall down.
Step1
Check if it is flat
and vertical, and
cast concrete.
Step3
Install the beam
connecting parts to beam.
Step2
For D72/D80 triple type
Wide beam type installation procedure
1
Installation of posts and beams
2
Installation to base hole
Insert the post into
the base hole, and
fix with support
stand not to fall
down.
Step1
Check if it is flat
and vertical, and
cast concrete.
Step2
Install as the side which the caution
label is attached comes inside.
Beam
Beam connecting bracket
(Parts box)
Washer M8
(Parts box)
Beam
Hexagon bolt
M8×85-22
(Parts box)
Washer M8
(Parts box)
Spring washer M8
(Parts box)
Cap nut
M8(Parts box)
Hexagon bolt
M8×25
（
Parts box
）
Anchor rod
Corner bracket
（
Corner parts set
）
Post
Support stand
Support stand
Caution label
