Installation of the motor mount.
Slot
the motor
mount
into the slot
s
of
the
fuselage,
Glue in place with
medium CA adhesive.
Install the elevator servo in the
direction shown above. Screw into
place with 2 x PK screws.
As shown
above
p
lace
the steel wire
undercarriage into the slot.
Screw into place the undercarriage
securing plate.
Note: There
is 1 extra
securing plate supplied as a spare in
the kit.
.
Make slots in the ailerons and wing
trailing for the hinges, glue in place with
a medium
CA. Ensure you leave a small
gap to allow the aileron to move freely
without binding.
Install the aileron horn as
shown using medium CA
adhesive.
