4. Put 2 pieces of carbon rods with the length of 780mm into the slot of fuselage's stiffener,
pay attention to the right and left direction.
5. Stick the stiffener to the body of aircraft with foam glue, the fuselage should keep
straight.
6.. Connect carbon rod with stiffener with 502 glue after the stiffener has been adherent to
the fuselage firmly.
7. Check fuselage to make sure it is straight before the glue solidifies totally.
8. Insert the aircraft wing into body of aircraft ( as illustrated in the picture ) .
9. Before sticking the top surface to the body of aircraft please check the right and left
position of the aircraft wing to see whether they are symmetrical.
10. Stick wood strips of landing gear with 502 glue, please make sure the slot for landing
gear should be kept upward.
11. Stick the wood accessories of the landing gear to the fuselage with 502 glue.
12. Drop the 502 glue into the junction of lower surface of aircraft wing and the body of
aircraft.
