25
ACTIVATOR 50 CHARGER USER’S GUIDE
lITHIUm bATTERy pROGRAmmInG
lITHIUm bATTERy DISCHARGE mODE, COnTInUED....
2) Press the STOP or DEC buttons to scroll to
the PROGRAM SELECT LI-PO menu (or the
LI-IO or LI-FE menu depending on the battery
type you selected in the USER SET PROGRAM / V.TYPE menu), then press the
ENTER button to open the menu. Press the DEC or INC buttons to scroll to the
DISCHARGE menu.
The first line shows the type of battery you selected in the USER SET
PROGRAM / V.TYPE menu. Make sure this matches the type of battery you’ll
be charging. If it doesn’t, return to the USER SET PROGRAM / V.TYPE menu and
select the correct battery type. An incorrect setting can result in damage to
your battery.
5) Press and hold the START button for more than
3 seconds to begin the discharge process. An
automatic battery check will be performed.
If you receive a BATTERY CHECK HIGH VOLTAGE or a BATTERY CHECK
LOW VOLTAGE error, press the STOP button to go back to the previous
screen, then carefully check the number of cells and voltage of the battery to
be charged.
When the discharge process begins, the status
screen will be displayed. This screen shows
various data about the current discharge
process, including the elapsed discharge
time, the current voltage of the battery and the
current discharged capacity in mAh.
3) Press the ENTER button. The discharge current
value will flash. Press the DEC or INC buttons
to select the desired discharge current, then
press the ENTER button again to store that value.
• Discharge current values range from 0.1 to 1.0 amp.
4) The input voltage value will be flashing. Press
the DEC or INC buttons to select the desired
input voltage of your battery, then press the
ENTER button to store that value.
• Input voltage values range from 1S to 6S in series. It should match the input
voltage of your battery.
