22
ACTIVATOR 50 CHARGER USER’S GUIDE
1) Connect the charger to its power source, plug the output power adapter cord
into the power outputs of the charger, then plug your Lithium battery into the
output power adapter cord. If your battery features a balance connector, plug
it into the correct balance port on the charger. If your battery does not feature
an XH balance connector, an adaptor board can be used.
lITHIUm bATTERy fAST mODE CHARGInG, COnTInUED....
lITHIUm bATTERy pROGRAmmInG
2) Press the STOP or DEC buttons to scroll to
the PROGRAM SELECT LI-PO menu (or the
LI-IO or LI-FE menu depending on the battery
type you selected in the USER SET PROGRAM / V.TYPE menu), then press the
ENTER button to open the menu. Press the DEC or INC buttons to scroll to the
FAST CHG menu.
The first line shows the type of battery you selected in the USER SET
PROGRAM / V.TYPE menu. Make sure this matches the type of battery you’ll
be charging. If it doesn’t, return to the USER SET PROGRAM / V.TYPE menu and
select the correct battery type. An incorrect setting can result in damage to
your battery.
3) Press the ENTER button. The charge current
value will flash. Press the DEC or INC buttons
to select the desired charge current, then press
the ENTER button again to store that value.
• Charge current values range from 0.1 to 6.0 amps. We recommend 0.5C to 1.0C.
4) The input voltage value will be flashing. Press
the DEC or INC buttons to select the desired
input voltage of your battery, then press the
ENTER button to store that value.
• Input voltage values range from 1S to 6S in series. It should match the input
voltage of your battery.
5) Press and hold the START button for more than
3 seconds to begin the charging process. An
automatic battery check will be performed and
the confirmation screen will be displayed. ‘R:’ shows the number of cells found
by the charger and ‘S:’ shows the number of cells selected by you previously.
If both numbers are identical, you can begin charging by pressing the ENTER
button. If the numbers don’t match, press the STOP button to go back to previous
screen, then carefully check the number of cells and voltage of the battery to
be charged.
