16
ACTIVATOR 50 CHARGER USER’S GUIDE
2) Press the ENTER button. The ON/OFF value
will flash. Press the DEC or INC buttons to
select the desired value, either ON or OFF, then
press the ENTER button again to store that value. The minutes value will flash.
3) Press the DEC or INC buttons to select the desired minutes value, then press
the ENTER button again to store that value. Choose from 10 to 720 minutes.
• The default values are ON and 120 minutes.
SAfETy TImER mEnU, COnTInUED....
InITIAl USER pARAmETER SETUp
This menu controls the charger’s capacity safety cut-off value. This feature sets the
maximum charge capacity that will be supplied to the battery during charge. As
an extra measure of safety, if the delta-peak voltage is not detected or if the safety
timer fails for any reason, this feature will automatically stop the charging process
at the selected capacity value.
CApACITy CUT-Off mEnU
2) Press the ENTER button. The ON/OFF value
will flash. Press the DEC or INC buttons to
select the desired value, either ON or OFF, then
press the ENTER button again to store that value. The mAh value will flash.
3) Press the DEC or INC buttons to select the desired mAh value, then press the
ENTER button again to store that value. The minimum value is 10mAh.
• The default values are ON and 5000mAh.
We don’t recommend using a value that adds any more than 10% of your
battery’s capacity.
1) From within the USER SET PROGRAM menu,
press the DEC or INC buttons to display the
CAPACITY CUT-OFF menu.
This menu controls the charger’s audio functions. A key beep sounds each time
you press one of the buttons to confirm your action. There is also an audible beep
and/or melody sound at various times during operation to alert you to different
mode changes, charging process completion, etc. These audible sounds can be
turned ON or OFF.
1) From within the USER SET PROGRAM menu,
press the DEC or INC buttons to display the
KEY BEEP - BUZZER menu.
KEy bEEp - bUzzER mEnU
