3
Wooden and fiberglass parts:
!
Fuselage
!
Canopy
!
Main wings x2
!
Horizontal stab x2
!
Rudder
!
Motor mount x2
!
Motor cowling x2
!
Clear plastic canopy
Hardware:
!
Landing gear (wheels and struts)
!
Long and short pushrods
!
Long and short CF rod
!
Thumbscrews x2
!
Additional hardware (screws, clevises, horns etc.)
Equipment required (not included):
!
4 - 6 channel radio and receiver
!
2x9g servos and 3x5g servos
!
Battery (2200mah 3S1P is recommended)
!
Strong epoxy (~15min) and foam safe CA glue
!
Velcro
!
2.5mm drill bit
!
Small screwdrivers and Allen (hex) keys
!
Craft knife
!
Soldering iron
!
1 - 1.5 meters of 12AWG cable
!
Various bullet connectors
!
Heat shrink and heat gun
!
2x 30cm servo extension leads (an additional two will be required depending on
your choice of ESC)
!
Servo Y harness (for dual elevator servos)
