Hobbico Heli-Max 200FP V-Cam Instruction Manual Download Page 4

4

®

FEATURES & SPECIFICATIONS

FEATURES & SPECIFICATIONS

Features

   

On board micro digital video camera

   

On board micro snap-shot digital picture camera

   

USB Memory Card reader

   

2G memory card

Product Specifi cations

 

Rotor Diameter:  380mm (14.97”)

 Empty 

Weight: 

235g 

(8.3oz)

 

Weight RTF:  287g (10.12oz)

 

Fuselage Length:  420mm (16.53”)

 Height: 

160mm 

(6.30”)

 Width: 

90mm 

(3.54”)

Camera Specifi cations

 

Size:  40mmL X 20mmW X 8mmH

 

Codec Video:  Motion JPEG, 1280x720, 30fps, fi le extension.avi

 

Codec Audio:  PCM S16 LE, mono

 

Still Image capture:  1280x720, 96dpi, fi le extension.jpg

®

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

Operational Warnings

Failure to follow these safety precautions may result in injury to 
yourself and others.

  

Keep your face and body as well as all spectators away from the rotating 

blades whenever the battery is connected.

  

Keep loose clothing, shirt sleeves, ties, scarfs, long hair or loose objects such 

as pencils or screwdrivers that may fall out of shirt or jacket pockets away from 
the rotors. The spinning blades of a model of this type can cause serious injury.

  

When choosing a fl ying site stay clear of buildings, trees and power lines. 

AVOID fl ying in or near crowded areas.

  

DO NOT fl y close to people or pets. Maintain a safe distance from the quadcopter.

  

Do not alter or modify the model. Doing so may result in an unsafe or un-
fl yable model.

  

When and if repairs are necessary you must correctly install all components 

so that the model operates properly on the ground and in the air. Please check 

Summary of Contents for Heli-Max 200FP V-Cam

















Reviews: