background image

The Flitt is equipped with a rechargeable
 3.7V Lithium Polymer (LiPo) battery.
Please pay attention to the following
cautions for safe use:

• KEEP OUT OF REACH OF CHILDREN. 
• LiPo batteries must be recycled or disposed  of properly. 
• Do not use this product if the Flitt was severely
   crashed and the battery possibly damaged. 
• Never disassemble, puncture or modify the
   Flitt battery.
• Always turn off Flitt power after each use.
• Only charge using a USB 5.0V 2A max
   power supply.
• Do not charge inside your car.
• Do not leave unattended while charging.
• Allow Flitt to cool for 30 minutes before recharging.
• Always place Flitt on a fireproof surface while
   charging.
• Keep away from combustible materials while
   charging.
• Unplug the charger immediately if it or the battery
   becomes hot! However, it is normal for the
   charger and battery to get warm. Disconnect
   from the charger and quickly move to a fireproof
   location if the battery begins to get hot or smoke! 
• Keep a supply of sand accessible when charging.
   Dumping sand on the battery will extinguish a
   LiPo chemical fire.
• Always disconnect the charger after charging
   is complete.

• Adult supervision required.
• Always install the propeller guards before flying.
• Calibrate the Flitt accelerometers before each     
   flying session. 
• Do not touch the spinning propellers.

 Keep your face and body as well as all spectators  

   away from the propellers.

• Stay clear of buildings, high voltage wires, trees,  
   shrubbery or groups of people.
• Don’t fly in bad weather conditions, such as in high  
   wind, rain, or snow.
• Operating Temperature Range: 32ºF to 104ºF           
   (0ºC to 40ºC).
• Always keep Flitt in your line of sight.
• Maintain a safe pilot-to-device distance while flying.
• Flitt is not a toy. If not operated correctly, it could  
   possibly cause injury to you or spectators and   
   damage to property.
• Do not alter or modify, as doing so may make it  
   unsafe or unflyable.
• You must check the operation of Flitt before       
   every flight to insure that it has remained                    
   structurally sound.

Battery Precautions

Safety Precautions

Quick Start Guide

Instant Share

Fine Tuning

Buttons

Gallery

Settings

Wi-Fi

Memory Card Capacity

Battery

Altitude

Slide Bar

Flash

Controls

Emergency Landing

Video Record

Safety Unlock

One-tap Take Off/ Land

Camera

From this menu, you can 
set up and customize Flitt, 
manually calibrate the 
sensors, access the help 
menus and the Start Up 
slide show.

Swipe left or right to 

rotate the camera

Swipe left or right to 

rotate the camera

Frame your subject

Single shot: Press the camera icon 
or the up/down volume button on 
your mobile device. Self-Timer: Push 
and “hold” the camera icon. Choose 
timer and then either 3S or 10S.
Multi-picture Burst: Push and “hold” 
the camera icon. Choose Burst, and 
then choose the number of pictures 
you want to take in a burst.

To start recording a 
video, select the video 
icon. To stop, push 
the square icon.

Use the directional control stick, 
altitude slide bar, and left/right 
swipe area to control the position 
of Flitt. For easiest control, make 
small movements and then let 
go. To rotate, swipe the screen 
left or right. If you want to rotate 
constantly, swipe one direction and 
hold. For indoor flight, there are 
fine tune buttons to compensate 
for any slight drift.

The orientation of the controls are 
as if you were sitting inside Flitt. 
So, if you rotate, you may find that 
moving left moves Flitt towards or 
away from you. With practice, this 
will become second nature.

Push this icon to adjust your flight speed. 
Use low (L) or medium (M) speeds 
indoors. If you have plenty of room to fly, 
use high (H) speed to fly fast.  

Speed Selector

This feature loads your pictures or videos to 
your favorite social media quickly. You can 
set this up before you fly. Go to Settings and 
choose which social media service you want 
to use and how you want to add a caption. 
Then go back to the main screen and select 
the instant share button and then take another 
picture. You’ll be prompted to sign in to your 
selected service. 

When ready to fly, first select either instant 
share 1 or instant share 2. Next, take pictures 
or videos as you fly. During your flight (for iOS) 
or after (for Android), your pictures will be sent 
over your chosen service.

This part of your screen shows 
you what the Flitt camera sees. 
The image can be moved to the 
left or the right by swiping the 
screen. This rotates Flitt so the 
camera will see the picture you 
want to take.

Screen Gesture Swipe Control

You can move the image you 
see on the screen from side 
to side by swiping the open 
screen area. This rotates Flitt so 
that you can easily frame your 
perfect shot! For framing up and 
down, use the altitude slider in 
small movements.

flittcamera.com

See Setup and Flying instructions inside.

Reviews: