3
Connections
Make sure that the cables are held in place using the wire clamp underneath the
scale. Do not pinch or kink the cables.
Power Supply
The electrical cord on this machine is equipped
with a three-pronged grounding plug which must be connected to
a properly grounded receptacle. If the receptacle is not the proper
grounding type, contact an electrician. Do not remove the grounding
prong from the plug.
Electrical and grounding connections must comply
with the applicable portions of the National Electrical Code and/or
other local electrical codes.
Check that the voltage selector in the base of the scale is set
to 110 before plugging the cord into the receptacle.
Cleaning
Unplug before cleaning or servicing.
Harsh abrasives, solvents, scouring cleaners and alkaline
cleaning solvents, such as baking soda, should not be used especially
on the display windows. Under no circumstances should you attempt
to wipe the inside of the scale. The outside may be wiped down with
a clean cloth moistened with a dilute solution of water and mild liquid
dishwashing detergent.
View in Direction of Arrow
Network
Connections
Serial Port
Power Cable
Voltage Selector
Fuse Holder
110V
22
0V