Hobart Multi-Handler 200, Owner'S Manual

Page: 33 / 76

OM-285922 Page 30
SECTION 6 − OPERATION
6-1. Controls
1 Display
2 Voltage Control Knob
Controls voltage in MIG process. See weld
parameter chart for initial setting.
3
MIG Gun and Spool Gun Trigger
Receptacle
4 MIG Gun and Spool Gun Power
Receptacle
5 Positive Output Receptacle
6 Negative Output Receptacle
7 TIG Remote Receptacle
Connect optional foot control to unit.
8
Process Select Button
Press the button to select the desired
process.
9 Wire Feed/Amperage Knob
Controls wire feed speed in MIG process
and amperage in the stick or TIG process.
See weld parameter chart for initial set-
tings.
10 Power Switch
11 Shielding Gas Fitting
12 Circuit Breaker CB1
Ref. 500578-A
1
2
3
4
5
7
Rear View
6
8
9
10
11
12