11
6.4
Priming of suction hose detergent
(only with built in detergent pump)
To prime the detergent suction hose between the injector and
container:
–
Close hood.
The temperature indicator
Rinse
➅
displays:
"SF1"
= Priming of
detergent
suction hose.
–
Push and hold
Start
button
➁
for
1
minute
approx.
6.5
Priming of suction hose rinse agent
To prime the rinse agent suction hose between the injector and
container:
–
Push
Program
button
➃
again.
The temperature indicator
Rinse
➅
displays:
"
SF2
"= Priming of
rinse agent
suction hose
.
–
Push and hold
Start
button
➁
for
3 minutes
approx.
By using external container with a longer suction hose, hold the
Start
button
➁
about
6 minutes
.
7
Operation
7.1
Preparation
–
Check correct position of rack guides, wash / rinse arms and
strainers.
– Open shut-off valve, switch on main switch or put the
plug in.
–
Check level of detergent and rinse agent containers.
–
Close hood and push the
ON
button
➀
, tank will be filled.
The
Start
button
➁
illuminates
red
during fill and heating cycle.
This process can take several minutes (machines with built in
softener, adjusted to water hardness H02 or H03 need approx.
40 minutes).
When the
Start
button changes to
green
light, machine is ready
for operation.
