32
Displaying stored results
1. Enter memory mode
With the meter switched on, press the M-button to enter memory
mode. If no values are saved the display will read „MEM“. Otherwise,
the latest test result will be shown.
2. Displaying single test results
Up to 450 test results can be stored on the meter. All single results
can be displayed chronologically, starting with the latest value. To
display single test results, carry out the following steps:
Press the S-button and keep it pressed. You will now see date, time
and the glucose value in its measuring unit. By pressing the S-but-
ton again, you can go to the next, before measured value. This way,
you can scroll through all test results, starting with the most recent
one.
3. Deleting test results
Select the test result you want to delete, as explained above. Keep
the M-button pushed, until „dEL“ and then „OK“ appears on the dis-
play. You will hear a signal tone, as well. After that, the test result
has been deleted. Releasing the M-button will bring you back to the
last stored single test result.
Note:
If you release the M-button immediately after „dEL“ appear-
sand „OK“ has not appeared, yet, the selected result will not be
deleted. You will enter the average glucose value display, instead.
Summary of Contents for smartLAB Sprint
Page 2: ......