18
Push the S-button to save your settings. After that, the first two
digits of the hour start flashing. Use the M-button to adjust the
correct hours and save it with the S-button. After that, proceed in
the same way for the minute setting.
4. Choosing a measurement unit
After the time setting, the meter automatically continues with
the measurement unit setting. The LCD reads „SCL“ and „mg/dL“.
Press the M-button for approx. 10 seconds, to change the unit
to „mmol/L“. Save your settings by pushing the S-button. Your
smartLAB
®
sprint
setting is now completed.
Summary of Contents for smartLAB Sprint
Page 2: ......
