ASSEMBLY INSTRUCTION
1) Install the Front Stabilizer
Attach the Front stabilizer (27) to the Main frame (30) with two Bolts (21), Flat washers (48 )
Spring washers (71) and Cap nuts (3). (See figure 1)
2) Install the Rear Stabilizer
Attach the Rear stabilizer (28) to the Seat cushion adjustor tubinh (4) with two Bolts (21), Flat washers (48)Spring washers
(71)and Cap nuts (3). (See figure 2)
3) Install the Front Upright Tube
Put the cable end of the resistance cable for the Tension control (56) into the spring hook of Tension control wire (50) as shown
on drawing
A
of figure 3.
Pull the resistance cable for the Tension control (52) up and force it into the gap of metal bracket of Tension control wire (50) as
shown on drawing
B
of figure 3.
Connect the resistance cable of Tension control (52) with the Tension control wire (50) completed as shown on drawing
C
of
figure 3.
Insert the Front upright tube (46) into the tube of Main frame (30) and secure it with four Bolts (14), Spring washer
ψ8(74) and Arc
washers (12). See drawing
D
of figure 3-D.
Summary of Contents for R9254
Page 26: ......
