34
R6800-i
Step 9:
1)
Attach U-shape bar (13) onto handlebar post (7), Open the clamper at central of handlebar post (7)
and put the hand pulse sensor wire (17) on either side of clamper. TurnU-shaped bar (13) to the
desired position and close up the clamper and fasten with the T knob (71)and fastener (37) to the U-
shaped bar (13). Ensure it is tightened very well.
2)
Put the hand pulse sensor wire (17) throught wire plug (70) and get through the hole behind the
handle bar post (7). Pull out the handle pulse sensor wire (17) from top of the handle bar post (7).
Step 10:
1)
Connect the hand pulse sensor wire (17) with cable at the back of computer (23) firmly.
2)
Connect the upper computer cable (25) with cable at the back of computer (23).
3)
Release 4 bolts (63) from back of computer (23). Attach computer (23) onto the bracket at top of
handlebar post (7), fix with 4 bolts (63) firmly.