HMS IXXAT simplyCAN User Manual Download

Page: 14 / 24

Cleaning

12 (22)

Cleaning

►

Disconnect the device from power supply.

►

Remove dirt with a soft, chemical untreated, dry cloth.

Support/Return Hardware

Observe the following information in the support area on

www.ixxat.com

•

information about products

•

FAQ lists

•

installation notes

•

updated product versions

•

updates

11.1

Support

►

For problems or support with the product request support at

www.ixxat.com/support

►

If required use support phone contacts on

www.ixxat.com

11.2

Return Hardware

►

Fill in the form for warranty claims and repair on

www.ixxat.com

►

Print out the Product Return Number (PRN resp. RMA).

►

Pack product in a physically- and ESD-safe way, use original packaging if possible.

►

Enclose PRN number.

►

Observe further notes on

www.ixxat.com

►

Return hardware.

Disposal

►

Dispose of product according to national laws and regulations.

►

Observe further notes about disposal of products on

www.ixxat.com

simplyCAN User Manual

4.01.0001.22001 1.0 en-US

Summary of Contents for IXXAT simplyCAN

























Search results

Summary of Contents for IXXAT simplyCAN

Reviews:

Related manuals for IXXAT simplyCAN

Brands by name

Popular brands

HMS IXXAT simplyCAN, User Manual

Search results

Summary of Contents for IXXAT simplyCAN

Reviews:

Related manuals for IXXAT simplyCAN

Brands by name

Popular brands