Intesis
TM
Modbus Server - KNX
User Manual r1.2 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
5 / 18
1
Description
Introduction
This document describes the integration of KNX installations into Modbus RTU and Modbus TCP systems using the
Intesis Modbus Slave
– KNX
gateway.
The aim of this integration is to make accessible a KNX TP-1 installation from a Modbus control system or device,
as if it was a part of the own KNX TP-1 (EIB) system and vice-versa.
For this, Intesis acts as a Modbus TCP server or Modbus RTU slave device in its Modbus interface, allowing
read/write points from the Modbus client device(s), and offering this point's values through its KNX interface, acting
in the KNX system as one more KNX device of the system.
Configuration is carried out using the configuration software Intesis
TM
MAPS.
This document assumes that the user is familiar with KNX and Modbus technologies and their technical terms.
Integration of KNX TP-1 devices or installations into
Modbus RTU Master or Modbus TCP Clients
control and monitoring systems
KNX TP-1
Modbus TCP
Ethernet TCP
Modbus RTU RS485
Modbus RTU RS232