24
BE2235
Final Check
Your treadmill is now assembled. Please make the following final checks:
Make sure all screws / bolts are tightened.
Make sure the equipment is on a flat, level surface.
Power Up
Plug one end of power cable into the treadmill as shown.
Plug the other end into a suitable AC outlet (220-240 volt, 50/60 Hz).
Switch the treadmill on using the on/off switch.
Attach the safety key to the console.
NOTE: Before you run on the treadmill for the first time, use the Quick Start instruction and allow the treadmill to run
independently for 10 minutes. Check the running mat is tightened correctly and runs smoothly. If you think the mat
needs adjusting please see next page for more details.
Safety Key
The treadmill will only operate when the safety key is in position - if the safety key is removed while the treadmill is in
operation, it will stop immediately. Before every workout session please make sure you attach the safety key to the
console and the clip at the other end to your clothing. When the treadmill is not in use, you should remove the safety
key and store it somewhere safe, out of the reach of children.
Computer Instruction
The Display Range
Initial Value
Setting Range
Display Range
TIME (mm:ss)
0:00
8:00 ~ 99:00
0:00 ~ 99:59
SPEED (km/h)
0.0
N/A
0.8 ~ 13.0
DISTANCE (km)
0.00
1.0 ~ 99.0
0.0 ~ 99.9
PULSE (bpm)
HP
N/A
40 ~ 199
CALORIES
0
10 ~ 990
0 ~ 999
