HMS ATLAS TYTAN 14, Manual Instruction

Page: 41 / 84

- 10 -
FIG.6
1.
Separately maneuver each of the Guide Rods(#12) to the holes of part(#5), and then attach them
using (2)M10*25 Hex Bolts(#96) and (2)
φ
10 Arc Washers(#115).
FIG.7
FIG.7
4. Screw the M12 Hex Nut(#120) to the part(#14),place the
φ
12 Flat Washer(#116) to the
part(#14),then screw the part(#14) to the part(#6),tighten up the M12 Hex Nut(#120) to lock the
part(#14).
5. Attach the part(#6,#29) to the part(#5) using (2)M10*75 Hex Bolts(#101), (4)
φ
10 Flat
Washers(#114) and (2)M10 Nylon Lock Nuts(#118).
6. Attach the part(#6) to the part(#4) using (2)M10*25 Hex Bolts(#96), (4)
φ
10 Flat
Washers(#114) and (2)M10 Nylon Lock Nuts(#118).