HMS ATLAS TYTAN 14, Manual Instruction

Page: 36 / 84

- 5 -
Assemble
FIG.2
FIG.2
1. Set the Foot End Cap(#71) to the part(#3).Set the End Cap(#70) to the part(#7).
2. Attach the Buffer(#89) to the part(#7) using (1)M5*12 Socket Bolt(#108) .
3. Attach the part(#7) to the part(#3) using (2)M10*55 Square Neck Bolts(#106),(2)
φ
10 Flat
Washers(#114) and (2)M10 Nylon Lock Nuts(#118) . Note:Wrench tighten these bolts here.
4. Align the tube of the part(#21) and the hole of the part(#7). Then insert the Tube(#22) to the
hole.
5. Align the small hole of the Tube(#22) and the small hole of the part(#7). Then insert the Spring
Pin(#35) through the hole.
6. Insert the
φ
30 Plug(#67) to the part(#21).