HMS Premium BE6000, Manual Instruction

Page: 56 / 96

Interface instruction
1. Audio input
Using audio wire to connect treadmill audio interface and audio Source (Mobile phone and tablet
computer), the treadmill play audio from other Audio source.
2. USB input interface
Put U disk into right USB interface, press MP3 or MP4 icon to play the music, picture and video from U disk. The
support U disk Max 32G.
Statement !
1. The product uses the open Android operating system, necessary amendments were made to the
system by the company and/or the third party partners, so it may not support all the functions of the
standard Android system, or it may occur incompatible problem with the third party software when
using. The company does not undertake any responsibility regarding these problems.
Any software which installed on this product or any works of the third party ,like,
words,pictures,video or other software which uploaded or downloaded personally, the company does
not take the responsibility of their legitimacy , quality or other aspects and any consequences which
caused by these.
2. All the App and pictures in products are available for reference only, please take the actual product as
standard. Some certain features and functions that mentioned in manual may not be implemented
due to product differences, or no support from local network operators or service providers. So the
functions mentioned in manual may not exactly same as the actual product, please take the actual
product as standard.
3. Our product development technology is constantly innovating and upgrading, All the future technical
changes are not subject to further notice.
Folding, Moving and Unfolding Instruction
1. Folding: The treadmill is foldaway. Lift the end of the main frame and fold upwards until the
connecting bar rebound to the cover of cylinder tube. Positioning card pedal must be withhold
horizontal tube of base support (See figure A-1)
2. Moving: Holding the end of the main frame then push the treadmill to front or back. Or holding the end
of the main frame, with one foot resist one wheel, make frame pull back to make the front end dangling,
pushing treadmill to move as you need.
3. When you want to put the treadmill to the work position, please lift the end of main frame ,then lightly
tread positioning card pedal to make it upwarp (see figure A-2), card buckle left the horizontal tube of
base support, at the same time pull down the frame forcibly, remove your hand after the frame with
cylinder shrink down for a while. The cylinder will shrink under the weight of itself and the main fame
goes flat. (see figure B).