HMM Diagnostics ANT smartLAB combo, User Manual

Page: 31 / 92

31
ENGLI
SH
Changing the battery
The smartLAB
®
combo uses a CR 2032 3V battery. This is integrated in the cadence
sensor. Follow these instructions to change the battery:
1. Open the battery lid by turing the lid with a coin in direction of
the arrow.
2. Remove the battery carefully and insert the new battery into the
device with the plus side to the lid.
3. Close the lid by using the coin again.
Sensors, magnets and batteries need to be disposed of according to local regulations.