50
APPENDIX
Access Control of ion|IQ
®
NDT Menus
The ion|IQ
®
NDT menus are designed to be easily accessible by store personnel,
but can be protected to prevent unauthorized changes, by use of two passwords,
the User password and the Installer password as follows:
Installer settings are always protected by an Installer password that is
available only to the installer or other HME-authorized personnel.
Store settings menus, Network settings menu, Message Center menus and
Volume adjustment menus can be protected if a User password is created in
the Store settings. These menus can be accessed using the User password,
Installer password, or by an HME password (provided by HME if the User
password is forgotten).
When the password has been entered to access a menu, it will no longer be
required to access other protected menus, as long as there is menu activity.
After 5 minutes of no menu activity, the password will again be required to
enter the protected menus. This also applies to protected web pages.
Password required
Menus
None
Status screens
Detector menus (Speed team, Reset vehicle detectors)
Registration menus
Diagnostics menus
Service screen
User password
Installer password
HME password
Store settings menus
Network settings menus
Message Center menus
Volume adjustment menus
Installer password
Installer settings menus
If a password is required, you will see one of the following displays.
To enter the password, use the
◄
and
►
buttons to move the highlighted box left
and right in the
Enter Password
field, and use the
+
button to put alphabetic
characters in the box, or the
−
button to put numeric characters in the box. Each
time you have entered a character of your password, press the
►
button to move
the highlighted box to the next position and enter the next character. If you want
to start over with a new password, press the
Clear all
button. After entering your
entire password, press the
Continue
button.
