31
Network Settings
If your base station is connected to a computer network, the
network settings were set up by the ion|IQ
®
NDT installer. If you
need to contact HME Technical Support regarding any problem
with your network connection, you may be asked to make
changes to the network settings. To do this, select the
Menu
button on the
MESSAGE STATUS
display and then select
More
on the
MAIN MENU
.
Press the
Network
button on the
ADVANCED MENU
display, to
open the
NETWORK SETTINGS
display.
Basic Network Settings
On the
NETWORK SETTINGS
display, you must press the button
for each item you are requested to change. Each button pushed
will cause a display to open, where you may be requested to enter
the necessary address for network communication. If you push the
More
button, the
ADVANCED NETWORK SETTINGS
display will
appear with additional settings.
NOTE:
Some Network Settings
changes will cause the
base to automatically reset.
NOTE:
Network settings are
normally made or changed
only by authorized personnel
such as store managers.
Making changes to Network
settings may require a
password.
If a password is needed, see
APPENDIX, Access Control
.
