29
Set User Password
The User password is used to protect the Message Center, Network,
Volume Settings and Store Settings menus. This password is not
the same as the Installer Password that is used to protect the
Installer Settings.
For security purposes, you may need to change the password
periodically or when someone’s employment terminates. To do
this, press the
Set password
button on the
STORE SETTINGS
display. The current password will be shown in the
Enter new
password
field on the
SET USER PASSWORD
display.
Use the
◄
and
►
buttons to move the highlighted box in the
Enter New
field. Use the
+
button to put alphabetic characters in
the highlighted box, or the
−
button to put numeric characters in
the highlighted box. Continuing down from A will take you to
numeric characters. Continuing up from 9 will take you to
alphabetic characters. Press the
►
button to move the
highlighted box to the next position and enter the next character.
If you want to start over with a new password, press the
Clear all
button. After entering the entire new password, press the
Back
button twice to save the new password and return to the
ADVANCED MENU
.
Restore Installer Settings
To delete all of your custom settings and return to the original
settings made by the ion|IQ
®
NDT installer, press the
Restore
installer settings
button on the
ADVANCED STORE SETTINGS
display, and then press the
Restore
button on the
RESTORE
INSTALLER SETTINGS
display. The base will automatically
reset and restore the installer settings.
NOTE:
See
APPENDIX, Access
Control
for a description of
how passwords are used to
control access to ion|IQ
®
NDT
menus.
