User Guide | FreeSpeak Edge Base Station
8.8.5
Configuring GPIs
This example opens a talk route from the Base Station to a Channel when an input occurs on
GPI1 (for instance, from a footswitch).
Navigate to
Configuration > Logic
.
1. On the left panel, click GPI1 to select it.
2. Click the Add button
in the center panel.
3. Click the Options button
to select a
Source
. Select the
Edge Base
.
4. Click the Options button
to select a
Destination
. Select the required Channel.
5. Click the blue check mark.
6. To label the GPI, click the pencil icon.
7. To test the GPI, or turn it on and off, navigate to
Status > Logic
. See
Page 92
Summary of Contents for Clear-Com FreeSpeak Edge
