Listening to a non-docking iPod or other
portable audio devices
If you are using an iPod without a docking port, other MP3 player, or other
portable audio device, you can play it through the unit via the LINE IN jack
located on the back of the unit. (Fig. 5)
1. Plug one end of the Connection Cable (included) (Fig. 1) into the
headphone or line-out jack on your audio device and the other end of the
Connection Cable into the unit’s LINE IN jack located on the back of the
unit (Fig. 5).
2. Press the POWER button on the unit to turn it on (Fig. 1).
3. Turn on and play external audio device.
4. Press the ‘
\/
’ or ‘
/\
’ button on the unit to adjust volume (Fig. 1).
Note: You may need to adjust the volume on external device too.
5. To turn unit off, press the POWER button on the back of the unit.
Note: You also need to turn off your external audio device as well.
Figure 5
iPod
®
Shuffle
Connection
Cable
LINE IN
8
9
Changing the Colored Faceplates
Attaching Faceplate
1. Choose a faceplate.
2. Place faceplate on top of unit, so 3 notches are lined up.
3. With one hand on top of unit, apply pressure and gently rotate the faceplate
clockwise, ensuring all 3 notches lock in place. (Fig. 6)
Removing Faceplate
1. With one hand on top of unit, apply pressure and gently rotate the
faceplate ring counterclockwise, releasing all 3 notches from the base of
the unit. (Fig. 7)
2. Grasp the faceplate and pull up. Be sure not to force or pull too hard so
that the notches do not break.
3. See ATTACHING FACEPLATE for directions on replacing the faceplate.
Figure 6
Figure 7
