6
1. Before you begin, remove your iPod from its case or ‘skin’. Place insert in dock,
being sure that the two plastic tabs face the front of the unit. Press insert into place,
ensuring it is firmly placed in the dock (Fig. 2). Carefully place your iPod into the
docking area so that the pin connector in the dock is fully connected to the pin
socket on the bottom of your iPod (Fig. 4). You will hear a “chirp”, indicating that
your iPod is properly connected.
2. Your iPod will begin charging, until fully charged.
Note: Your iPod will charge even if the POWER button is turned off.
The unit only needs to be plugged in for the iPod to charge.
3. To remove/replace an insert, first remove your iPod then insert
fingernail in slot on insert (Fig. 2), and gently pull up.
Listening to Your iPod
1. Press the POWER button on the top of the unit to turn it on (Fig. 1).
2. Press the PLAY/PAUSE button on your iPod to pause play; press again to
resume play.
3. Press the ‘
\/
’ or ‘
/\
’ button on the unit to adjust volume (Fig. 1).
4. Press the
or
on your iPod to go to the next or previous track.
5. To turn off the unit, press the POWER button on the top of the unit. The
iPod will continue charging in the dock.
7
Getting Started
1. Attach the DC adaptor to the DC Jack located on the back of the unit.
(Fig. 3)
2. Plug the cord into 120V household outlet.
Charging your iPod™
Select the correct insert for your particular iPod model from
the chart below:
When you want to connect a different size iPod, remove the insert from the
dock and replace with the correct size insert. To remove dock insert, place
fingernail in slot on insert (Fig. 2) and gently pull up. You must always use the
appropriate size insert for your iPod. If you do not find the correct matching
dock insert listed above to your iPod model, you may use the dock adapter
insert that was included with your original iPod purchase or call HMDX AUDIO
Service Center at 1.800.466.3342 to purchase one.
Note: Make sure you are using the correct insert for your iPod and
that it is properly placed in the dock of the unit. Failure to do so may
damage your iPod.
WARNING:
INSERTS AND PIN CONNECTOR ARE DESIGNED FOR
APPLE iPOD MUSIC PLAYERS ONLY. ATTEMPTING TO ATTACH OR
FORCE ANY NON-iPOD MUSIC PLAYER INTO ENCLOSED INSERTS OR
ONTO THE PIN CONNECTOR WILL
DAMAGE AND EVEN DESTROY
YOUR DEVICE.
Figure 4
Insert Label
iPod Model
nano-3
iPod nano 3rd Generation
nano-4
iPod nano 4th Generation
video 30G
5th Gen iPod (30GB), iPod Classic (80GB & 120 GB), iPod Touch
video 60G
5th Gen iPod (60GB & 80GB), iPod Classic (160GB)
touch-2
iPod touch, 2nd Gen
