15
Beltpac or All-In-One Headset Adjustments
Sidetone Adjustment (Beltpac only, not on all-in-one headset)
When you speak into the microphone, you can hear sidetone (your own voice)
in the beltpac headset
Sidetone can be adjusted as follows:
1
Be sure the beltpac power is on
2
While holding down the “O” button, press the volume-up
▲
or volume-
down
▼
button as many times as needed to reach an acceptable level
You do not hear beeps except for maximum or minimum double beep
Maximum sidetone level is recommended
Microphone Gain Adjustment
Some users speak louder or softer than average
The microphone gain adjustment helps to compensate for extremes in
speaking level of coaches using beltpacs or all-in-one headsets
1
Be sure the beltpac or all-in-one headset power is on
2
While holding down the “X” button, press the volume-up
▲
or volume-
down
▼
button as many times as needed to reach an acceptable level
You do not hear beeps except for maximum or minimum double beep
Recommended microphone gain levels are:
Beltpacs
–
10 clicks down from maximum
All-in-one headsets
–
12 clicks down from maximum
NOTE:
The microphone gain can be monitored through sidetone, or preferably by
someone else using a beltpac or all-in-one headset, or at the base station
NOTE:
You will hear “Maximum” if you attempt to go higher than maximum
microphone gain
You will hear repeating beeps if you attempt to go lower than minimum
microphone gain
Microphone gain and sidetone adjustments will be saved in memory and
does not need to be reset after the unit is turned off and on
