INSTALLATION
3.2.4.1 External water kit connection
Please follow the instruction of the HLF External Water Kit
CAUTION
The water connection must only be connected to drinking water.
The maximum pressure of the water line has to be between 1 to 6 bar in order to
prevent damages to the inlet water valve. A lower pressure will not be sufficient to open
the inlet water valve, meanwhile a higher pressure will break the valve causing in this
way a water flood.
Refer to the national laws of your country for the connection to the water line.
To connect the water line to the HLF 1700, is necessary to use a tube with a female
screw of
¾
of inch at each end of it, as showed on the following picture.
HLF Italian Design
22
I.M. HLF 1700 Eng V1-2017
